Hi All
(YHP- Yard Hauling Parrel)
I'm having a bit of trouble with my YHP, if I try to douse the sail when it's reefed the YHP can't open up into a big enough loop from the mast to the sling plate which prevents the yard from moving aft far enough and it won't come down, just about went swimming because of it this morning.
about the only fix I can think of is to have loops in the halyard above the cleat and tie the YHP off to those loops so when I ease the halyard the YHP is eased at the same time, is this a bad idea?
also, I'd like to try setting my sail further aft on the mast, as it is the mast is about 3 inches forward of the center of the yard, would it be better to
a) Set the YHP further forward on the yard and shorten the upper luff hauling parrel? or
b) Just shorten the upper luff hauling parrel and leave the YHP where it is?
Bill
EDIT: forgot to mention that the YHP is set as recommended in the PJR, tied off at the sling plate and run around the mast and back through a loop at the sling plate and down to the base of the mast